EAS Products

Amplifiers

High fidelity Class-D amplifiers with DSP.

EAS-AMP-120D

120 watts stereo or mono powered amplifier with DSP and delay. It fits in a 1U half-rack space and can be mounted in 19″ racks alone or two side-by-side, or even directly on flat surfaces using our BR series of brackets.

EAS-AMP-250D

250 watts stereo or mono Hypex nCore powered amplifier with DSP and delay. It fits in a 1U half-rack space and can be mounted in 19″ racks alone or two side-by-side, or even directly on flat surfaces using our BR series of brackets.

EAS-AMP-500D

500 watts stereo or mono Hypex nCore powered amplifier with DSP and delay. It fits in a 1U half-rack space and can be mounted in 19″ racks alone or two side-by-side, or even directly on flat surfaces using our BR series of brackets.
CP Series Control Panel

Interfaces for controlling the system, some of which includes audio inputs.

EAS-CP-5

Control panel for volume control, mute and source selection for five EAS-SYSCON-12 zones. The module receives power from the SYSCON over the EAS-bus.

EAS-CP-M1

Single zone volume control, mute and source selector for the EAS-SYSCON-12. It also mixes and sends the following input signals to the EAS-bus: 1x microphone (XLR) and 2x unbalanced stereo analog audio (RCA). The module receives power from the EAS-bus.

EAS-CP-V

Single zone volume control, analog unbalanced audio input over minijack and USB interface for the EAS Admin system and DSP control software. The module requires external power and adds power and audio to the EAS-bus.
EAS-24 Series

Amplifiers and single input zone hubs with DSP and several 15 to 24-volt bus converters.

EAS-24-NODE-4D

One group of four 24-volt bus outputs for mono or stereo setups, one local stereo unbalanced output (RCA). Each output powers up to three EAS-24-AMP-30Ds. The module requires an external 24-volt power supply.

EAS-24-NODE-12D

Three groups of four 24-volt bus outputs for mono or stereo setups, one local stereo unbalanced output (RCA). Group volumes can be controlled individually. The module requires an external 24-volt power supply.

EAS-24-AMP-30D

Small but capable 25-watt mono amplifier with DSP. It can power one, two or three speakers depending on volume requirements. The amplifier requires 24-volt bus power coming from a NODE.
FX Series

Modules that fit inside standard 70mm inset junction boxes.

EAS-FX-RXLR

Stereo XLR output module that fits inside a standard in-wall electrical junction box, but can also be used on-wall with the included metal casing.

EAS-FX-TXRL

Stereo XLR input module that fits inside a standard in-wall electrical junction box, but can also be used on-wall with the included metal casing.

EAS-FX-V3

This module serves as a volume controller for up to three FX enabled units or groups of units. It fits inside a standard in-wall electrical junction box, but can also be used on-wall with the included metal casing.
Input/Output Modules

Modules that insert or extract audio from your EAS-bus.

EAS-TX-DA

Analog RCA and digital TOSLINK to balanced analog audio. The module could be powered over the bus, or if connected directly to a power supply, it adds both power and audio to the EAS-bus.

EAS-RX-11

Analog balanced to unbalanced audio converter. The module receives power from the EAS-bus.
Problem Solvers

Modules that help out when doing larger installations.

EAS-PI-3

Enables you to connect more bus powered devices by adding and additional external power supply. It also splits one bus input into three identical bus outputs. This module delivered bundled with a 45-watt 15-volt power supply.

EAS-RJ45-SPLIT-13

A simple passive EAS-bus splitter with one input and three outputs.
Product Demo

Modules for in-store demonstration of products like headsets, soundbars and speakers

EAS-AMP-8

Demo module for analog sound products that splits the incoming EAS-signal to eight 3,5 mm TRS outputs.

EAS-AMP-8-S

Demo module for analog sound products that routes the incoming EAS-signal to one of eight selectable 3,5 mm TRS outputs. Selection, volume control, and muting is done on a touch panel.

EAS-AMP-8S-SPDIF

Demo module for sound products that converts and routes the incoming EAS-signal to either one of eight selectable S/PDIF outputs, or to all outputs simultaneously. Selection is done on a touch panel.

EAS-HP-4C

Demo module for headphones that splits an incoming signal to four 3,5 mm TRS headphone amplifiers. The default input is the EAS-bus but selection changes to a separate 3,5 mm TRS-input when that is connected, and back when disconnected. The general volume can be adjusted using the side-mounted volume control.

EAS-HP-6A

Demo module for headphones that splits an incoming EAS-bus signal to fix 3,5 mm TRS headphone amplifiers. The general volume can be adjusted using the side-mounted volume control.
System Controllers

Main hubs of larger systems, managing signal flow to several zones.

EAS-SYSCON-12

Matrix for twelve EAS-bus ports, four local stereo unbalanced inputs (RCA) and two local unbalanced outputs (RCA). Supports instant switching between presets using CP/FX series control panels. The module requires external power.