EAS-24-AMP-30D
Mono digital audio amplifier with DSP and delay
Small but capable 25-watt mono amplifier with DSP. It can power one, two or three speakers depending on volume requirements. The amplifier requires 24-volt bus power coming from a NODE.
The EAS-24-AMP-30D contains an integrated audio DSP with 10-band parametric EQ, variable high/low-pass filter, dynamic processor with noise gate and limiter.
- The amplifier features an over- and undervoltage protection, overtemperature protection and DC detect.
- It’s powered from an EAS-24 bus using a shielded CAT-6 cable with RJ45 connectors.
- On customer request, Laud Media can modify the amplifier characterics in order to adapt to and significantly improve the performance of the selected speaker.
Technical Specifications
EAS-24-AMP-30D
Operating voltage:
24 (18 - 26) VDC
Idle Power Consumtion:
0.9 W
Inputs:
- EAS-24-bus (RJ45)
Outputs:
- EAS-24-bus (RJ45)
- Speaker Connector
Frequency Response:
20 - 22 000 Hz
Distortion/Noise:
<1 THD+N
Continous Output Power:
25 W
Maximum Output Power:
35 W (<5 THD+N)
Dimensions (WxHxD):
129x76x29 mm
Weight:
218 g
Environmental
Operating Temperature:
0° - 50° C (32° - 122° F)
Operating Humidity:
10% - 85%, Non-condensing
Storage Temperature:
-40° - 70° C (-40° - 158° F)
Storage Humidity:
10% - 85%, Non-condensing
Regulatory Approvals
EMC:
- EN 55032:2012
- EN 55103-2:2009
- IEC 60533:2015
- IEC/EN 60945:2002 + Cor1:2008 /EMC requirements only
Safety:
IEC/EN 60065: 2014
Materials/RoHS:
EN 50581:2012
Warranty
Limited Warranty 1 Year Parts and Labor
Manufactured by
Laud Media AS, Løkka 7, N-3271 Larvik, Norway
Data is subject to change without notice.
Reference
EAS-24-AMP-30D
- Input EAS-24-BUS
- Speaker output connector
Plug: Phoenix MSTB 2,5/ 2-ST pitch: 5 mm
Impedance: min. 4 Ω - Ground
- Speaker output connector
- Loop EAS-24-BUS
- LED power
Short flash: Standby
Steady light: Normal operation
